NRP40SN Rohde & Schwarz
Power Meters
50 MHz to 50 GHz 3-Path Diode Power sensor, -70 dBm to +23 dBm, 100 pW to 200 mW, 2.92 mm input RF connector, LAN and USB.
| RENTAL | 485 € /week* | ||||
| SALE |
|
||||
Specifications : NRP40SN Rohde & Schwarz
3-path diode power sensor :
- 50 MHz to 40 GHz,
- Level range : -70 dBm to +23 dBm, max. 200 mW (AVG) / 1 W (PK, 10 µs),
- 100 pW to 200 mW,
- >50,000 readings/s,
- 10,000 measurements triggered/s,
- Dynamic range 93 dB,
- Trigger the I/O port directly on the sensor,
- Detachable cables with different connectors (e.g. USB),
- Using LAN/USBT™ for easier remote control,
- High measurement accuracy over the entire level range,
- Fast and precise measurements at low levels,
- Operation with NRP2 base unit, laptop/PC and many Rohde & Schwarz instruments.
Download the technical documentation NRP40SN Rohde & Schwarz
You need to be connected to consult and download the documentation
Create my account / Connexion
The R&S NRPxxS/SN power sensors use three separate diode paths, each operated in the optimum detector range.
As a result, the average power can be determined with high accuracy independent of the modulation type.
Measurement results are hardly affected by interfering signals or harmonics.
The R&S NRPxxS/SN power sensors therefore behave in a way similar to thermal power sensors but offer significantly higher speed.
They provide up to 93 dB dynamic range with an excellent lower measurement limit of –70 dBm.
